Congratulations on your new yellow friend!
If your bird is already charged and installed on your wall, you basically just have to feed it with fresh air
How to install and use your Birdie
Installation Guide
How it works
Keep Calm
(Below 1000ppm CO2)
Open Your Windows
(Above 1000ppm CO2)
Needs Charging(Low Battery)
**the battery will usually last for 6+ months before it needs to be recharged with the following USB-C cable.
That’s it. You’re all good to go
That’s kind of all you need to know about Birdie. It’s as simple as it looks.
Still hungry for more details?
You really don’t have to keep on reading, but we won’t stop you from geeking out on technical information:
How does it work?
Birdie® is detecting the CO2-level in your room every 10 min. If the CO2-level exceeds 1000ppm, Birdie® will drop down.
When Birdie® is hanging down it detects the CO2-level every 2 min. If the CO2-level is above 1000ppm Birdie will stay down, until next detection 2 min. after.
If the CO2-level goes below 950ppm, Birdie® will automatically pop-up into upright position.
After Birdie® repositions to upright it will enter a cool-down period of 2 hours, in order to save power and because it’s rare that the CO2-level will exceed 1000ppm within 2 hours after ventilation.
If you wish to get an exact detection of the current CO2-level, simply just lift and replace Birdie® on the wall-bracket. - this will reset Birdie® and detect the CO2-level immediately.
How do I charge it?
Birdie® is battery-driven and will last +6 months on a full charge. If you don’t want to think about charging it, you can install it with the USB-C plugged-in permanently.
The LED-lamp on the backside of the bird is only an indicator for battery-status. Red = Charging. Green = Fully charged.
Where should I place the bird?
As a rule of thumb one Birdie® should be able to cover a room up to 150m². We typically recommend to install the bird in the room of your home where you spend most of your time. We recommend you to install the bird in a height of 1,5-2,5m.
Disclaimers
*This is not a medical device.
*This is not a real-time monitoring device
Specifications:
Power input: ⎓5VDC+/-20%, 1A
Battery capacity: 5000mAh
Operational temperatur.: 0-40ºC
Storage temperature: -10-50ºC
Humidity: 10% to 85% RH
Altitude: up to 2000m;
External Power adaptor: this product is intended to be supplied only by a Listed Class 2 or Limited Power Source (LPS) Power Supply with output rating of 5VDC,1A or by a Listed power source having a USB port meeting LPS requirements.
Approvals:
EU (CE):EN IEC 61326-1:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN IEC 61326-1:2021
US:
UL Std. No. 61010-1 3rd Edition + AM1:2018, CAN/CSA-C22.2 No. 61010-1-12 Third Edition + AM1:2018.
FCC Rules and Regulations Part 15 Subpart B Class B, ANSI C63.4-2014
Maintenance and usage:
The product is maintenance-free. Indoor use only.
If the product is used and installed in a different manner than described within this manual,
the protection and safety may be impaired and warranty is voided.
Company Info:
Fresh Air CompanyApS, Reg.No. DK42427519
Sønder Boulevard 83, 1720 Copenhagen, Denmark.