You’re watching this video because you’re Birdie is acting strange and needs a little calibration.
Luckily there is a cure!

Here’s the proces of updating the firmware of your Birdie.

1. Go outside (Bring Birdie + Wallmount).

2. Attach Birdie to wallmount.

3. wait for 30 sec.

4. Insert paper clip into pin hole. (small hole next to LED-lamp.)

5. Push button inside pin hole for 5 sec. and release.

6. Wait for 30 sec. and Birdie should go into a 45 degrees position.

7. Wait 3 min. and Birdie should go intoa 135 degrees position.

8. Done! Now Birdie is recalibrated.

We apologize for the trouble and time this issue has caused you.

Sorry for the inconvenience!